SMA Technologie AG Safety Instructions
Technical Description SI5048-11:EE4206 Page 25
The Sunny Island 5048 can start on its own. When working on the stand-
alone grid, ensure that ALL sources of AC and DC power in the system
have been switched off (see above).
When touching the device, please note that some parts of the Sunny
Island 5048 housing may heat up during operation. These temperatures
may exceed 60 °C. There is a danger of burn injury.
This device was NOT developed to power life-sustaining medical devices.
The Sunny Island 5048 may not be used in systems where a power outage
could result in personal injury.
This device is suitable only for installation in enclosed spaces. Therefore,
do not expose it to moisture, rain or direct sunshine (protection degree
IP40).
The Sunny Island 5048 has been designed for use at elevations up to 3000 m
above sea level. Contact SMA Technologie AG before using it at an elevation
above 3000 m.
A performance loss of 0.5 % per 100 m is to be expected starting at an elevation
of 2000 m above sea level!
To Next Page
Loading...
