8 Decommissioning SMA Solar Technology AG
122 SI80H-60H-OffGrid-IA-en-11 Installation Manual
5. If the off-grid inverter is protected against theft,
loosen the safety screws.
6. Loosen the screws between the off-grid inverter and
the wall mounting bracket on both sides using an
Allen key (AF 5).
7.
Risk of injury due to the heavy weight of the off-grid inverter
• Take into account the weight of the off-grid inverter (see Section 12"Technical
Data",page144).
• Lift the off-grid inverter upwards and off the
wall mounting bracket. To do this, use the
side recess grips or a steel rod (diameter:
maximum 30 mm). Keep the off-grid inverter
horizontal when moving it.