SMA SUNNY ISLAND 8.0H - Status of the Off-Grid Inverter

4 Product Description SMA Solar Technology AG
24 SI80H-60H-OffGrid-IA-en-11 Installation Manual
4.4 Sunny Remote Control
You can configure and control the off-grid system centrally with the Sunny Remote Control display.
For a multicluster system, each master must be connected to a Sunny Remote Control. Error messages
for the individual clusters are configured and displayed on the corresponding Sunny Remote Control.
Figure8: Layout of the Sunny Remote Control
Position Description Explanation
A Display Four-line display shows operating data (e.g. operating state
or display values) and events, warnings or errors of the
off-grid inverter.
The display backlight is automatically deactivated after a
short time of inactivity.
B Button Pressing the button will turn on the backlight, acknowledge
parameters or switch the level within a menu.
The return icon on the display indicates when you can
perform an action by pressing the button.
Turning the button will switch on the backlight, change
parameters or navigate within a menu level.
CSlot for SD card‒
A
B
C