SMA Solar Technology AG 2 Safety
Installation Manual SI80H-60H-OffGrid-IA-en-11 15
Burn Hazards
Some parts of the enclosure can become hot during operation.
• During operation, touch the off-grid inverter on the enclosure lid only.
Short-circuit currents in the battery can cause heat build-up and electric arcs. Observe the following
safety rules before working on the battery:
• Remove watches, rings and other metal objects.
•Use insulated tools.
• Do not place tools or metal parts on the battery.
Electrostatic Discharge (ESD)
By touching electronic components, you can damage or destroy the off-grid inverter.
• Earth yourself before touching any components.
To Next Page
Loading...
