4 Additionally Required Materials and Equipment
SMA Solar Technology AG
Operating manualSTP110-60-BE-en-1618
Material or equipment Quan-
tity
Explanation
Rubber mallet 1 Only required if mounted without pro-
file rails: For securing the expanding
screws for mounting
Wrench (AF16) 1 Only required if mounted with profile
rails: For attaching the mounting
bracket
Socket wrench with 16 mm insert 1 Only required if mounted with profile
rails: For attaching the mounting
bracket
Phillips screwdriver (PH3) 1 For attaching the product to the mount-
ing bracket
Cable cutter 1 For trimming cables
Insulation stripping tool 1 For insulating the cable for the AC
connection
Press tool 1 For attaching the ring terminal lugs to
the cables of the AC connection
Hot-air blower 1 For attaching the heat-shrink tubings to
the AC conductors
Clean cloth 1 Used to clean terminal lugs
Brush 1 Only required if mounted with profile
rails: For cleaning the aluminum con-
ductors
Wrench (AF33) 1 For loosening and attaching the swivel
nut of the communication connection
Measuring device with a measurement range
designed for the maximum AC and DC voltage
of the inverter
1 For verifying that no voltage is present
Current clamp 1 For verifying that no current is present
To Next Page
Loading...
