SMA Sunny Tripower CORE2 - Opening the Cable Compartment

7 Opening the Cable Compartment
SMA Solar Technology AG
Operating manual STP110-60-BE-en-16 33
7 Opening the Cable Compartment
For some of the actions described in this document, the cable compartment must be opened.
Procedure:
1. Disconnect the inverter from all voltage sources (see Section11, page66).
2. Loosen the two screws on the cable compartment
cover using the enclosed internal Allen key (TX30)
and open the cable compartment.
2
1
2x2x2x
3. Lift the limiting lever on the inside of the cover on the
right and remove from the thread.
1
4. Fold the limiting lever on the joint and turn it towards
the cable compartment.
5. Engage the end of the limiting lever in the cable
compartment with the thread.
☑ The cable compartment cover has been secured and remains open.