SMA Sunny Tripower CORE2 - Mounting the Product on a Wall

6 Mounting
SMA Solar Technology AG
Operating manualSTP110-60-BE-en-1630
10. Use the pan head screws (M5x65) to attach the
inverter to the mounting bracket (PH3, tightening
torque: 4.5Nm).
2x2x2x
6.6 Mounting the Product on a Wall
CAUTION
Risk of injury due to weight of product
Injuries may result if the product is lifted incorrectly or dropped while being transported or
mounted.
• Transport and lift the product carefully. Take the weight of the product into account.
• Wear suitable personal protective equipment for all work on the product.
• Transport the product using the carrying handles or hoist. Take the weight of the product
into account.
• Use all carrying handles provided during transport with carrying handles.
• Do not use the carrying handles as attachment points for hoist equipment (e.g. straps, ropes,
chains). Insert eye bolts into threads provided on top of the product to attach the hoist
system.
Additionally required material (not included in the scope of delivery):
☐ 4 heavy-duty anchors
Procedure:
1. Screw the bracket parts to the ends of the
connecting rod (PH2, tightening torque: 1.5Nm)
using the cheese head screws (M4x10) to mount
the mounting bracket.
1
2x2x2x
2
2. Align the mounting bracket using a spirit level and mark the drilling positions.