10 Operation
SMA Solar Technology AG
Operating manual STP110-60-BE-en-16 59
10.4 Start Page Design of the User Interface
Figure 12: Design of the user interface's home page (example)
Position Designation
A
Menu
• Overview
– General information
Displays current measured values, the communication status and the
device information
• Device monitoring
Configuration of settings for the grid code and operating parameters
• Device
– Firmware update
Performing firmware updates for the inverter
– Inverter log
Export of a log of all inverter messages
– Fault recorder
Export of a log of all inverter fault messages
• Communication
– Run information
Displays IP and MAC address of the device
– System maintenance
Logging the exports of messages or fault messages, performing a
restart, resetting all settings
– System time
Setting the time and date of the system
– MODBUS
Switching the communication on and off via Modbus
– Port parameters
Configuration of Ethernet settings
• About
Displays the inverter firmware version
To Next Page
Loading...
