SMAC CBC-EIP - Software Troubleshooting; Network and Communication Issues

45
4.4 Common software troubleshooting
4.4.1 IP address alterations
IP address of the CBC-EIP drives can be altered by different methods as discussed in
section 2.2.2. If the user forgets the IP address of the drive and wanted to identify
the drive, any DHCP software can be used to automatically scan the drive in ethernet
network. The below procedure uses ipConfig software to retrieve the IP address.
The software can be downloaded from https://www.anybus.com/support/file-doc-
downloads/compactcom-40-series-specific/?ordercode=AB6674
Step 1: Install the software and if the drive is connected in the ethernet network, it
will be scanned and displayed in the window.
Step 2: IP address can be altered in the DHCP setting and that configures the new
IP address.