Thank you for choosing our smanos W600 WiFi / LTE Smart Home Alarm System.
Installing the W600 alarm system is easy and quick. Before using the product, we
recommend reading the manual rst. There are some parts of the installation which
have to be done in the right order to complete the installation successfully.
Getting to Know Your System
This is a dual network system that utilizes both WiFi and cellular network. When the
WiFi is in use, the cellular network will be in standby status (make sure the cellular
function is activated from “Settings”- “My Hub”- “Cellular Network”). In the event of AC
power loss or WiFi disconnection, the cellular network will be implemented until power
or WiFi connection is re-established.
All sensors are wirelessly linked to the hub. In the event of alarm activation, for
example, when a sensor is triggered, a push notication will automatically be sent and
an alarm call will be made to all registered users.
The system can be controlled and monitored both on-site by using the remote control
supplied or remotely from anywhere in the world with our free mobile app. The
included RFID tags are used to arm or disarm the system.
The system can be expanded to include up to 50 wireless sensors, 10 remote controls
and 50 RFID tags.
To Next Page
Loading...
