30
Wireless Siren Arm/Disarm Beep(s) (If Purchase Separately)
smanos wireless siren will beep once or twice when system is armed or partial armed
(home armed). This setting enables you to turn on/off this prompt tone. This function is
switched off by default.
Password Settings
(1) Home Mode Password
Enable this switch, you need to input the admin password before you set the system to
home mode.
(2) Admin Password
The default admin password is 1234.
(3) Duress Password
The default duress code is 1111. Duress code can be used when the user is threatened
to disarm the system, uses this duress code to disarm the system, the control hub will
dial out silently. You can change the password on this page.
To Next Page
Loading...
