13
Smart Hub Operation
Arming and Disarming the System by RFID Tag
Hold the RFID tag close to the RFID reader and swipe once within 2 seconds, the
system will be disarmed.
Hold the RFID tag close to the RFID reader more than 2 seconds, the system will be
armed.
Record Alarm Message
The hub calls the pre-stored emergency numbers in case of emergency and play a 10
seconds pre-recorded voice message. This message can be recorded by pressing the
record button on the hub for 3 times, the hub beeps once, and then you can start to
record.
This message can be played back by pressing the play button on the hub for 3 times.
Phone Dial
The hub can be used as a hands-free phone. Press the button to activate the hub’s
keyboard, enter the phone number and press the button again to dial out.
To Next Page
Loading...
