38
Door/Window Sensor
Test your sensors before installation
Step 1: Choose a suitable location
The sensor can be installed on doors, windows and other objects which can be opened
and closed. If you are installing the sensor on a metal door you may need to install a
non-metallic spacer under the transmitter and magnet.
Step 2: Secure the sensors with double-sided tape.
Make sure the triangle marks on the side of the transmitter and magnet are close to
each other and are within the range of 1 cm. As long as the space between them is
over 2 cm, the LED indicator on the transmitter will blink once.
≥2cm
PIR Motion Detector
Avoid installing the motion detector facing windows, near air conditioning, heating,
kitchen appliances, direct sunlight, in another motion detectors detection range, or
areas with major temperature uctuations.
Step 1: Choose a suitable location. It is recommended to install the detector between
2-2.2m high from the ground.
To Next Page
Loading...
