20
App Control - Main Page
Arm, Disarm, Home Arm (Partial Arm) this system and trigger an emergency alarm can
be done at this page.
System Armed
In this mode, all of the sensors are on alert; the hub’s internal siren will sound
when a sensor is triggered. You and all other pre-authorized users will receive push
notications to your and their devices. This mode is recommended for when no one is
at home; it can be easily set from the remote control or app.
Tap on the [ ] icon on the app or press the [ ] button once on the hub/remote
or hold the RFID tag close to the RFID reader for 2 seconds to arm the system.
When the system is armed, all the sensors are on alert. This mode is recommended
when no one is at home.