Smanos W600 - Notifications

28
Notications
(1) Enable Push Alert Tone
Note: Because of the android system limitations, this feature won’t be available for Android 8.0 or above
smartphone users.
(2) Enable Online/Ofine Notications
(3) Enable Status Change Notications
When the status of the system is changed, for example, you set it from Arm Mode to
Disarm Mode, then you will receive app push notication.
(4) Enable Notications for RFID Tags (Include SMS Message and App Push Notication)
When you arm or disarm the system via RFID tag, then you will receive app push
notication and SMS message* if a SIM card has been inserted.
*This SMS message only sends to the non-alarm notication receiving number.
(5) SMS & Phone Numbers for Receiving Alarm Notications
The stored phone numbers (up to 5 numbers) will receive SMS and phone calls in case
of triggered alarms.
The hub will make phone calls to the stored phone numbers successively (up to 3
rounds in turn). If the phone call is answered and any keypad command has been
operated by one of these users, it will stop calling the next phone number; otherwise it
will continue to remind users until it is up to 3 rounds.