11
Description of LCD Indicator Icon
LCD Screen Meaning
LCD screen lights up and
blinks per second
Hub is in low battery condition
LCD screen shows “AP”
The hub is in AP mode
LCD screen shows “UP--”
The hub is upgrading rmware
LCD screen shows “AFI”
Radio Frequency Interference is detected
LCD screen blinks with
number 01-05 continuously
to show detectors are being
triggered
01: One or more door/window sensors are triggered
02: One or more PIR motion detectors are triggered
03: Remote control/keypad panic call
04: One or more wired detectors are triggered
05: One or more 24-Hour Zone sensors are triggered
LCD screen blinks
continuously to show
“Number + TP”
“TP” means tamper alarm, someone removes a
device from its installed location.
00: Hub
01: One of the door/window sensors
02: One of the PIR motion sensors
03: One of the keypads
04: One of the wired sensors
05: One of the 24-Hour Zone sensors
LCD screen blinks
continuously to show
“Number + SOS”
Means SOS alarm, someone presses the SOS button
on the hub, remote control or keypad.
00: Hub
03: One of the remote controls or keypads
To Next Page
Loading...
