X
Pull the tyre sealant bottle out of the tyre
inflation compressor.
The filler hose stays
on the tyre sealant bottle.
X
Drive to the nearest qualified specialist
workshop and have the tyre changed there.
X
Have the tyre sealant bottle and filler hose
replaced as soon as possible at a qualified
specialist workshop.
Adjusting the tyre pressure
Increasing the tyre pressure
X
Switch on the tyre inflation compressor.
X
Observe the display.
Reducing the tyre pressure
X
Press button : next to
pressure gauge ;.
i
Even unused tyre sealant loses its effec-
tiveness over time.
Have the tyre sealant bottle replaced every
four years at a qualified specialist work-
shop.
Jump-starting and charging the bat-
tery
Please note
G
WARNING
Work carried out incorrectly on the battery
can lead,
for example, to a short circuit and
thus damage the vehicle electronics. This
can lead to function restrictions applying
to safety-relevant systems, e.g the lighting
system, the ABS (anti-lock braking system)
or the ESP
®
(Electronic Stability Program).
The
operating safety of your vehicle may be
restricted.
You could lose control of the vehicle, for
example:
R
when braking
R
in the event of abrupt steering manoeu-
vres and/or when the vehicle's speed is
not adapted to the road conditions
There is a risk of an accident.
In the event of a short circuit or a similar
incident, contact a qualified specialist
workshop immediately. Do not drive any
further. Always have work on the battery
carried out at a qualified specialist work-
shop.
G
WARNING
During charging and jump-starting, explo-
sive gases can escape from the battery.
There is a risk of an explosion.
Particularly avoid
fire, naked flames, cre-
ating sparks and smoking. Ensure there is
sufficient ventilation while charging and
jump-starting. Do not lean over a battery.
G
WARNING
During the charging process, a battery pro-
duces hydrogen gas. If a short circuit
occurs or sparks are created, the hydrogen
gas
can
ignite. There is a risk of an explo-
sion.
R
Make sure that the positive terminal of a
connected battery does not come into
contact with vehicle parts.
R
Never place metal objects or tools on a
battery.
R
It is important that you observe the
described order of the battery terminals
when connecting and disconnecting a
battery.
R
When jump-starting, make sure that the
battery poles with identical polarity are
connected.
148
Jump-starting and charging the battery
>> Handling accidents/breakdowns.
To Next Page
Loading...
