X
Pull yellow release = behind the trim up
and simultaneously
press release button ?
on the selector lever.
X
Shift the selector lever to N or P.
Replacing the bulbs
Useful information
G
WARNING
Bulbs, lamps and plug connectors can
become
very
hot during use. When replacing
a bulb, you could burn yourself on these
components. There is a risk of injury.
Allow these components to cool down before
replacing the bulb.
G
WARNING
The radiator fan may continue to move or
suddenly move again even after the engine
is switched off. There is a risk of injury.
If you have to carry out work in the front
compartment:
R
switch off the ignition
R
remove jewellery and watches
R
never touch the rotation area of the fan
R
keep items of clothing and hair, for
example, away from the fan
Observe the following rules when changing
bulbs:
R
only replace bulbs with the engine
switched off.
R
do not use bulbs that have been dropped or
show signs of visible damage,
e.g.
scratches.
R
do not touch the glass bulb with your bare
hands.
R
use only
replacement bulbs with the speci-
fied voltage.
R
do not allow bulbs to come into contact with
moisture.
R
have LED bulbs changed at qualified spe-
cialist workshops only.
Change only the bulbs described below your-
self in accordance with the specified bulb
types.
Replacing front bulbs
Changing dipped-beam and main-beam
headlamps
X
Switch off lights.
X
Open the service cover.
X
Remove cover :.
X
Pull out the connector.
X
Press retainer ; inwards and to the left.
X
Pull the bulb out.
X
Insert the new bulb.
X
Lock the retainer.
X
Insert the connector.
X
Replace and engage cap :.
154
Replacing the bulbs
>> Handling accidents/breakdowns.
To Next Page
Loading...
Need help?
General
