Operating and setting the smart Audio-
System
smart Audio-System overview
G
WARNING
Operating the integrated information sys-
tems
and
communications equipment in the
vehicle while driving will distract you
from traffic conditions. You could then
lose control of the vehicle. There is a risk
of an accident.
Only operate these devices if road traffic
conditions permit. If you are unsure about
the surrounding conditions, pull over to a
safe location and make entries only while
the vehicle is stationary.
:
Number keys 1 - 6
;
C Previous station or track
=
USB1 port and bracket connection for a
mobile
phone
with the smart cross connect
app
?
D Next station or track
A
% Goes back one menu level higher
B
Control for menu selection and station
list, 9 button
C
USB2 connection
D
Ã
Telephone menu, to accept or reject
calls
E
ª
System settings
F
8 Mute
G
Õ
Plays back media from external data
carriers
H
$
Switches on the radio and selects the
waveband.
I
External audio equipment (AUX jack)
J
Volume control,
Ü button
K
F Sets the radio text
Operating and setting the smart Audio-
System
X
To switch on or off: press Ü.
X
To scroll through menus: turn control B.
X
To select menu options: turn control B and
press the 9 button.
X
To navigate to the next-highest folders:
press the % button.
X
To set values: turn control B
and
press the
9 button.
X
To increase or decrease the volume: turn
control J.
Using external devices
Useful information
You can connect the following external devi-
ces:
R
USB devices, iPods® and MP3 players (USB
port)
R
External audio equipment (AUX jack)
R
Bluetooth® devices,
such as mobile phones
Removing and attaching the cover from
the USB1 port
Removing the cover
X
Turn the cover anti-clockwise using han-
dle :.
X
Press on marking ;.
X
Remove the cover.
90
Operating and setting the smart Audio-System
>> Using the smart Audio-System.