HAT600N Series ATS Controller User Manual
HAT600N Series ATS Controller Version 1.1 2019-09-05 Page 15 of 24
Date& Time Set
10-06-25 (2) 10:00
1 Exit
2 Timing start cyc
3 Load set
4 Start time
5 Continue time
1．Simplified Chinese
2．English
9. TIMING START
In the main screen, press key and select 3 Time start, and then press key, the screen will
show the time start interface as below:
Time start cycle: includes inhibit start; single time, weekly or monthly.
Load set: Starting generator with load or without load.
Start time: Generator start date and time.
Continue time: Generator continuously run time can be set on the duration of maximum time for 99
hours 59 minutes.
10. DATE AND TIME SETTING
In the main screen, press key and select 4 Date & Time set, and then press key, the screen
will show the Date & Time Set interface as below:
Press key and input corresponding bit values 0-9, press key and make bit shift to right. At the
last bit press key, so date and time can be updated.
Date and time format set: year-month-date (week) and hour: minute.
11. LANGUAGE SETTING
In the main screen, press key and select 5 Language, press again to enter into language
setting interface and the screen will show the language interface as follow:
Press to select the language and press to confirm the setting.
Language option：Simplified Chinese/ English
To Next Page
Loading...
Need help?
General
