I
NSTALLING
THE
S
WITCH
3-2
Equipment Checklist
After unpacking the TigerSwitch 10/100, check the contents to be
sure you have received all the components. Then, before
beginning the installation, be sure you have all other necessary
installation equipment.
Package Contents
◆ TigerSwitch 10/100 unit, SMC6724L2
◆ Four adhesive foot pads
◆ Bracket Mounting Kit containing two brackets and four screws
for attaching the brackets to the switch
◆ Power Cord—either US, Continental Europe or UK
◆ RS-232 console cable
◆ This Installation Guide
◆ Management Guide
◆ SMC Warranty Registration Card—be sure to complete and
return to SMC
Optional Rack-Mounting Equipment
If you plan to rack-mount the switch, be sure to have the
following equipment available:
◆ Four mounting screws for each device you plan to install in a
rack—these are not included
◆ A screwdriver (Phillips or flathead, depending on the type of
screws used)
To Next Page
Loading...
Need help?
General
