A
BOUT
THE
T
IGER
S
WITCH
10/100
1-2
Switch Architecture
The TigerSwitch is perfect for moving workgroups from
conventional 10 Mbps Ethernet to multiple-segment 100 Mbps Fast
Ethernet. This switch delivers dedicated 100 Mbps links to each
attached LAN segment (independent collision domain) or to any
PC attached directly to the switch, all with conventional cabling
and adapters. It completely eliminates the bottlenecks of shared
10 Mbps Ethernet networks by providing a wide bandwidth of up
to 8.8 Gbps. This makes it ideal for increasing the throughput of
interconnected Ethernet and Fast Ethernet hubs or server farms.
This switch includes two slots on the rear panel for optional
100BASE-FX or Gigabit modules. The 100BASE-FX module can be
used for backbone and remote connections. The Gigabit modules
can be used to uplink to a collapsed Gigabit backbone or for a
high-speed server connection.
Management Options
This switch contains a comprehensive array of LEDs for
“at-a-glance” monitoring of network and port status. It also
includes a management agent that allows the switch to be
managed in-band via SNMP or RMON (Groups 1, 2, 3 and 9)
protocols, with a Web browser, or remotely via Telnet. The switch
also provides a serial port on the front panel for out-of-band
management.
To Next Page
Loading...
Need help?
General
