SMC Networks ISE80 User Manual

-34-
No.PS※※-OMM0003-J
■[F 9] Power saving mode
Power saving mode is selectable.
When the Pressure switch is left for 30 seconds with no key operation, it will enter power saving mode
(the decimal point and indicator LED (only with the switch output ON) will flash during operation).
<Operation>
Press the
or button in function selection mode to display [F 9].
Press the
button.
Move on to setting of power saving mode.
Press the
button to set.
Return to function selection mode.
Setting of [F 9] Power saving mode completed
In power saving mode, any key operation will return the normal display. If there is no key operation for
30 seconds, the display will return to power saving mode (only in measurement mode).
∗: The indicator LEDs will flash when the switch is ON, but it is not synchronized with the output.
Setting of power saving mode
[ECo] and the set value are displayed in turn.
Press the
or button to select power saving mode.
In power saving mode, only the decimal points and indicator
LEDs will flash (the LEDs flash only when the switch is ON).

SMC Networks ISE80 Specifications

General

Brand	SMC Networks
Model	ISE80
Category	Switch
Language	English