SMC Networks ISE80 User Manual

-30-
No.PS※※-OMM0003-J
■[F 5] Display resolution
This function is used to change the pressure display resolution.
This can be used to prevent the digits from flickering on the display.
<Operation>
Press the
or button in function selection mode to display [F 5].
Press the
button.
Move on to setting of display resolution.
Press the button to set.
Return to function selection mode.
Setting of [F 5] Display resolution completed
∗: ISE80H cannot be set.
Not selectable depending on the selected display units.
The display resolution selectable unit is MPa (only for ISE), kPa (only for ZSE), bar and psi.
(the units "bar" and "psi" are selectable only for models with the units selection function.
[F 0] Units selection function on page 23.)
Setting of display resolution
Press the or button to select display resolution.

SMC Networks ISE80 Specifications

General

Brand	SMC Networks
Model	ISE80
Category	Switch
Language	English