SMC Networks ISE80 User Manual

-28-
No.PS※※-OMM0003-J
■[F 4] Analogue output / Auto-shift input
Auto-shift function
This function is available when the analogue output / auto-shift input option has been selected.
Auto-shift: A function where the switch output is determined by the change in pressure, relative to a
reference set value, when an external signal is input.
Auto-shift zero: A function where the switch output is determined by the change in pressure, relative to a
reference set value, and the display reset to zero, when an external signal is input.
<Operation>
Press the
or button in function selection mode to display [F 4].
Press the
button.
Move on to setting of function.
Press the button to set.
Move on to auto-shift function
setting when auto-shift input is
selected.
Press the
button to set.
Setting of function
Press the or button to select the function.
Setting of Auto-shift function
Press the or button to
select auto-shift function.
Move on to setting of effective
output.
Return to function selection
mode when analogue
output is selected.

SMC Networks ISE80 Specifications

General

Brand	SMC Networks
Model	ISE80
Category	Switch
Language	English