-42-
No.PS※※-OMM0003-J
Maintenance
How to reset the product after a power cut or forcible de-energizing
The setting of the product will remain as it was before a power cut or de-energizing.
The output condition is also basically recovered to that before a power cut or de-energizing, but may change
depending on the operating environment.
Therefore, check the safety of whole installation before operating the product.
If the installation is using accurate control, wait until the product has warmed up (approximately 10 to 15
minutes).
If the security code is forgotten
If you have forgotten your security code, please contact SMC directly.
To Next Page
Loading...
