SMC Networks PF3A801H-L

-34-
No.PF※※-OMY0005
<Operation>
Display [F 0] by pressing UP or DOWN button in function selection mode.
Press the SET button. Move on to reference condition.
Reference condition
Press the UP or DOWN button to select the reference condition.
Press the SET button to set.
Units selection function
Press the UP or DOWN button to select the display unit.
1) Flow rate
Press the SET button to set.
2) Temperature
Press the SET button to set.
3) Pressure
Press the SET button to set. Move on to switch output function.
Move on to units selection function.
(For units selection type)