-5-
No.PF※※-OMY0005
■Operator
♦This Operation Manual is intended for those who have knowledge of machinery using pneumatic
equipment, and have sufficient knowledge of assembly, operation and maintenance of such
equipment.
Only those persons are allowed to perform assembly, operation and maintenance.
♦Read and understand this Operation Manual carefully before assembling, operating or providing
maintenance to the product.
■Do not disassemble, modify (including the replacement of board) or repair.
Otherwise, an injury or failure can result.
■Do not operate the product outside of the specifications.
Do not use the product with flammable or harmful fluids.
Fire, malfunction, or damage to the product may result.
Check the specifications before use.
■Do not use in an environment where flammable, explosive or corrosive gases are present.
Otherwise, fire, explosion or corrosion may occur.
The product is not designed to be explosion proof.
■Do not use the product with flammable fluid
Fire or an explosion may result.
Only air and N
2
are applicable.
■Do not use the product in a place where static electricity is a problem.
Otherwise failure or malfunction of the system can result.
■If using the product in an interlocking circuit
•Provide a double interlocking system, for example a mechanical system.
•Check the product regularly for proper operation.
Otherwise malfunction can result, causing an accident.
■The following instructions must be followed during maintenance
•Turn off the power supply.
•Stop the air supply, exhaust the residual pressure in piping and verify that the air is released before performing
maintenance work.
Otherwise an injury can result.
To Next Page
Loading...
Need help?
General
