The accumulated value has
exceeded the accumulated flow
range.
(For accumulated increment)
Reset the accumulated flow.
(Press the DOWN and SET buttons
simultaneously for 1 second or longer)
The accumulated value has reached
the set accumulated value.
(For accumulated decrement)
A pressure of 7%F.S. or more is
applied during the zero clear
operation.
(Return to measurement mode in
one second)
Select the suitable IO-Link version for
the device.
Version of master and IO-Link
does not match.
Align the master IO-Link version to the
device.
: If the error cannot be reset after the above measures are taken, or errors other than above are displayed, please contact SMC.
To Next Page
Loading...
Need help?
General
