SMC Networks TigerSwitch SMC6709FL2 User Manual

C ONSOLE I NTERFACE
4-4
Menu Description Page
Status and Counters Displays connection status and statistics 4-6
Port Status Displays port connection status 4-7
Port Counters Lists Ethernet statistics 4-8
System Information Shows system model number, MAC address,
hardware version, and firmware version
4-9
Switch Static
Configuration
4-10
Administration
Configuration
Configures device information, IP address,
user name and password
4-11
Device Information Provides basic system description, including
contact information
4-12
IP Configuration Set IP address, subnet mask and gateway 4-13
Change Username Specifies user name for management access 4-14
Change Password Specifies password for management access 4-15
Port/Trunk
Configuration
Configures connection settings including
speed, duplex mode, and flow control;
also assigns ports to trunks
4-16
Port Mirroring
Configuration
Sets the source and target ports for mirroring 4-18
VLAN Configuration Sets VLAN groups and ingress filtering 4-20
VLAN Configure Sets the VLAN Mode; also sets port VID
and ingress filters for tagged-based VLANs
4-21
4-23
Create a
VLAN Group
Configures VLAN groups, including name,
identifier, and if limited to a specific protocol
4-21
4-23
Edit/Delete a
VLAN Group
Modifies VLAN groups, including name,
identifier, and if limited to a specific
protocol; or deletes a specified group
Priority Configuration Assigns priority tagged frames to high or low
queue; sets the service method to a specified
ratio, high before low, or first-in first-out
4-26
MAC Address
Configuration
Configures static addresses and address
filtering
4-28
Static MAC
Addresses
Sets entries for address, port number, and
VLAN identifier
4-28

SMC Networks TigerSwitch SMC6709FL2 Specifications

General

Brand	SMC Networks
Model	TigerSwitch SMC6709FL2
Category	Network Router
Language	English