S
WITCH
S
TATIC
C
ONFIGURATION
M
ENU
4-29
Field Attributes
• MAC Address – Physical address of a device mapped to this interface.
• Port Num – Port associated with the device assigned a static address.
•Vlan ID – ID of configured VLAN (1-4094). This option is only
available if IEEE 802.1Q tagged VLANs are enabled (page 4-23).
Console – Click Switch Static Configuration
=>
MAC Address
Configuration
=>
Static MA
C Address
. Click <Add> to open the Add Static
MAC Address page. Specify the MAC address, port number, and VLAN
ID, then save your settings.
After you configure a new address, it will be displayed on the Static MAC
Address Configuration page as shown below.
Tiger Switch 10/100 6709FL2 : Add Static MAC Address
===========================
Mac Address :0030299434DE
Port num :2
Vlan ID :1
actions-> <Edit> <Save> <Quit>
Save successfully!Press any key to return!
Tab=Next Item BackSpace=Previous Item Quit=Previous Menu Enter=Select Item
To Next Page
Loading...
Need help?
General
