Smeg CWC620D - Quit SET-UP Menu; Rinsing Temperature Setup


‐CW620/630

16
Steamextractionsystemoperatingtimedisplayand
setting




Thissubmenuandtherelativefunctionscanonlybe
accessedwiththeaidofapasswordavailableon
SmegTechandonlybytechnicalstaff.


6.2 Quit“SET‐UP“menu
Wait more than 10 seconds without pressing any button and the appliance quits this menu
automatically,
orpresstheon/off buttontoexit.


Caution: the tank and boiler temperatures shown on the display may be different from the actual
temperaturesbyafewdegrees,especiallyintransientphases(justaftertheFILLiscompleted,justafter
theendofthecycle,etc.)duetotheinertiaofthemeasurementprobe.


6.3 Rinsingtemperaturesetup

Modifythevalueoftheparameterbypressing.