Smeg CWC620D - Changing the Program


‐CW620/630

27
8.4 ChangingtheProgram
With the hood closed, to change to a fresh program
instead of repeating the last one, press the  button.
Theprogramsavailablearedisplayed.
If a program has already started, press  and hold it
downtointerruptit.
Changetheprogrambypressing 
Confirm the program start by pressingand holding it
downfor1second(lightL2changesbacktoorange).

Note:
Duringheatingofthewaterintheboilerandtankwiththecyclerunning,thetankheatingelement
andboilerheatingelementsymbolsmayappearonthedisplay.

Filterpresencesensor(onsomemodelsonly)
Thefilterisfittedwithasensorwhichchecksthatitisproperlyfitted;ifitisnotinthecorrectposition,
thewordFiLter”appearsonthedisplay.
