Smeg CWC620D - 9 Choosing the Program; 10 Supplementary Functions; Selecting the Crys Glassware Function (Available in P1-P2)


‐CW620/630

28
9 CHOOSING THE PROGRAM
PROGRAM TYPEOFDIRT DURATION(*)
P1 Glassesandplateswithlightdirt Approx60’’
P1+
Sanitisationfunction
Glassware,plastictrays,pre‐washedplates Approx60’’
P2 Glasses,cupsandplateswithlightdirt Approx90’’
P2+
Sanitisationfunction
Normalcycleforglassware Approx80’’
P3 Verydirtydishesandcutlery Approx150’’
P3+
Sanitisationfunction
Cycleforsanitisingplatesandglasses Approx4minutes
P4 Dependingonthedurationset. Asrequiredfrom4to10minutes


(*) The cycle duration stated above refers to three‐phase appliances supplied with hot water at
50°C.Iftheapplianceissuppliedwithcoldwater,thecycledurationmightincreasedepending
on the intake water temperature, since the dishwasher is fitted with the HTR system, which
requiressettemperatureandpressureforrinsing.
10 SUPPLEMENTARY FUNCTIONS


Toselectasupplementaryfunction,whentheprogramrequiredisshownonthedisplay(P1,P2,P3or
P4)pressthebutton.Onlyonesupplementaryfunctioncanbeselectedforeachprogram.
10.1 Selectingthecrys“glassware”function(availableinP1‐P2)
Reducestheprogram’srinsingtemperatureandduration

Afterselectingthe"Crys”function,performacyclewiththeapplianceemptytostabilisetheboiler
temperature



Pressandholditdowntoselecttheglasswarefunction
thenpresstoconfirmtheprogramstart.