EasyManua.ls Logo

Smeg CWC620D - Tstp (Minimum Rinsing Temperature) Function; Rinse Aid Pump (Display and if Required Reset During Maintenance); Detergent Pump (Display and if Required Reset During Maintenance)

Smeg CWC620D
35 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
‐CW620/630
19
6.9 tStP(minimumrinsingtemperature)function
Modifytheparameter(ON/OFF)bypressing .
Set at “on” for minimum rinsing temperature as set; set at “off” for rinsing regardless of boiler
temperature.
If the parameter is set as “off” and hot intake water is not used, the minimum rinsing temperature
mightbeafewdegreeslowerthanthesetting.
If the thermostop device is set “off” the rinsing T° are no longer monitored and the user is
responsible for ensuring that the minimum correct T° are maintained for the tank and boiler. It is
particularly important to check the intake water temperature.
Also refer to the insufficient washing/drying /foam in tank point of the “troubleshooting” section :
restoreTStopONand/orconnecttheappliancetoahotwatersupply
6.10 Rinseaidpump(displayandifrequiredresetduringmaintenance)
Toreset,press for3seconds.
6.11 Detergentpump(displayandifrequiredresetduringmaintenance)
Toreset,press for3seconds.

Table of Contents

Related product manuals