Smeg CWC620D - Energy Consumption - Display and Reset if Required; Customisation of Duration of Program P4; Steam Extraction Time Setting (Optional if Installed)


‐CW620/630

20
6.12 Energyconsumption–Displayandresetifrequired
Toreset,press for3seconds.
6.13 CustomisationofdurationofprogramP4.
ThedurationofprogramP4canbecustomisedfrom3to10minutes


Access the programming procedure and scroll through to
“ınF” usingthebutton, thenscroll through to03:00 and
press thebuttonto set thetimerequired (from 3 to 10
minutes)

After a few seconds without the user pressing any buttons,
thedisplaywillreturntothenormaloperatingstatusandthe
modificationswillbesaved.
6.14 Steamextractiontimesetting(optionalifinstalled)

Steamextractionsystemoperatingtimedisplayandsetting
