Need help?Do you have a question about the Smipack SL55 and is the answer not in the manual?
Guide on how to properly read and utilize the machine manual for safe operation.
Details SMIPACK's warranty terms and limitations for the machine.
Lists relevant European directives and technical standards the machine complies with.
Explains the meaning of various symbols used throughout the manual for clarity.
Identifies and lists the main components of the Smipack SL55 machine.
Provides the weight and dimensions of the machine when it is packed for transport.
Details the weight and physical dimensions of the machine in its operational state.
Instructions for safely transporting and unpacking the machine unit.
Guides on how to attach the machine to its trolley or support feet.
Step-by-step instructions for installing fuses into the machine's power board.
Critical safety guidelines and procedures for connecting the machine to the electrical network.
Specifies the electrical requirements and data for the machine installation.
Outlines the recommended environmental and operational conditions for the machine.
Provides guidance on the proper methods for machine demolition and waste disposal.
General overview of the SL series hood packer and its control panel.
Identifies specific danger zones on the machine and associated risks.
Details on the machine's identification plate and essential technical specifications.
Maximum dimensions and weight limits for products that can be packed.
Information on the types of film (PVC, Polyolefin) compatible with the machine.
Formula and explanation for calculating the required width of the film reel.
Explains the process of film sealing and cutting by the pulse-operated blade.
Describes the heat-shrinking process using forced circulation of hot air.
Instructions for correctly inserting the film reel and guiding it through the machine.
Guide on how to adjust the film perforators for optimal heat shrinking.
How to adjust the product support mesh height for proper sealing.
Procedures for adjusting the extent and strength of the hood opening.
Instructions for positioning the reel holder and product holding plate based on product width.
Step-by-step guide for performing the initial film sealing operation.
Detailed steps for placing products and performing the packaging cycle.
Overview of the operator panel, its buttons, and their functions.
Instructions for powering on the machine and initial display information.
Explains the two packaging modes (sealing and heat shrinking) and display indicators.
Guide on how to save custom operating parameters for different products.
Details on accessing and adjusting various machine parameters like temperature and timers.
Instructions for accessing and using the reserved menu with advanced settings.
Explains the meaning of symbols that appear on the machine's operator panel display.
Essential safety warnings and precautions before performing maintenance.
Overview of maintenance tasks, their frequency, and associated symbols.
Detailed instructions for safely removing and replacing the sealing blade.
Step-by-step guide for replacing the PTFE strips and silicon rubber.
Identifies specific areas on the machine for accessing components for inspection.
Table listing common operating problems, their causes, and solutions.
Explains error codes and messages displayed on the panel and their resolutions.
General| Brand | Smipack |
|---|---|
| Model | SL55 |
| Category | Stretch Wrapping Systems |
| Language | English |
To Next Page
