Smipack SL55 - Mounting Machine Supports

S L series - Use and maintenance manual
15
Translation from the original
2.5 MOUNTING MACHINE SUPPORTS
The SL series models can be positioned on specifically designed machine supports available
on-demand. Two versions are available: A and B.
A: Version with trolley
- Mount the machine holding trolley as shown in fig. 2.5.1.
- Position the machine on the trolley matching the feet 1 with the specific holes 2 and then use
the screws 3 to fasten the trolley to the machine.
B: Version with machine supports
- Mount the wheel on each support as shown in fig. 2.5.3.
- Insert the feet 1 into the holes 2 and then use the screws 3 to fasten the supports.
Fig. 2.5.1
Fig. 2.5.2
Fig. 2.5.3
Fig. 2.5.4