S
L
series - Use and maintenance manual
19
Translation from the original
3.1 DESCRIPTION OF THE MACHINE
The SL series hood packer is equipped with a simple but complete control panel connected to
a microprocessor which guarantees high performance and provides the operator with a great
deal of autonomy.
3.2 DESCRIPTION OF DANGER ZONES
The table below describes the zones of the machine where the operator must pay the utmost
attention to avoid possible danger.
ZONE A
Possibility of crushing upper limbs during manual closure of hood.
Possibility of burns by touching the sealing blade just after a packaging cycle.
ZONE B
Burns due to contact with very hot elements (tunnel zone with temperature
controlled heating elements).
ZONE C
Possibility of entering into contact with fans used for heat-shrinking process
by inserting hands underneath the product support mesh.
ZONE D Possibility of burns by touching the product support mesh.
ZONE E Small pricks caused by perforators on reel holder.
ZONE F During the packaging possibility of burns by touching the hood in plexiglas.
CHAPTER 3 - INFORMATION ON THE MACHINE
To Next Page
Loading...
