S
L
series - Use and maintenance manual
21
Translation from the original
3.4 TECHNICAL SPECIFICATIONS OF THE PRODUCT
The table below indicates the maximum dimensions and limit weights (minimum and
maximum) of the products which can be packed.
PACKAGING LIMITATIONS
It is not possible to pack:
•Products larger or heavier than that allowed
•Bulk products smaller than the openings in the grid product support mesh
•Wet products
•Flammable products
•Explosive products
•Products in bulk or volatile powders
•Any type of liquid products in fragile containers
It is also prohibited to:
•It is also prohibited to
•Replace with non-original spare parts
•Modify electrical connections in order to be able to by-pass internal safety devices
•Remove installed guards
ATTENTION!
Do not wrap anything which is not intended or which can in any way be dangerous for the user
and damage the machine.
Before performing any modification, you must contact SMIPACK S.p.A for their consent
3.5 FEATURES OF THE FILM
The machine has been designed to package various products using PVC e Polyolefin film with
a thickness up to 30 µm. The film, used in single fold execution, can be micro-perforated by
specific perforators mounted on the machine's reel holder.
[mm] SL45 SL55
X 410 520
Y 250 380
H 210 260
WEIGHT
> 50 g
< 10 kg
> 50 g
< 10 kg
To Next Page
Loading...
