Smipack SL55 - Page 32

Chapter 5 - Operation and use
32
Translation from the original
2 • Tunnel temperature
Menu for adjusting tunnel temperature.
3 • Shrinking Timer
Menu for adjusting heat shrinking time.
4 • Wait before start of heat shrinking process
Menu for adjusting the stand by time between the end of sealing and the start of heat shrinking.
5 • Hood opening delay
Delays the opening of the hood, after the end of the heat shrinking process.
Fig. 5.5.2
(can be set from 1 to 10)
Fig. 5.5.3
(can be set from 1 to 10)
Fig. 5.5.4
(can be set from 0 to 1)
Fig. 5.5.5
(can be set from 0 to 10)
Tunnel
Temperature 5,0
Shrinking
Time 4,5
Wait for
Shrinking 0,2
Opening
Delay 2,0