Smipack T650 - Parameters Menu [F3 and +]

81 / 284
Use and maintenance manual
T450 - T650E - T650EF - T650 - T650F
ENGLISH
Fig. 4.5.1
The parameter sets the conveyor belt speed in values from 0 to 40 with an increase of
1 unit.
Tab. 4.5.2
Set speed
0 1 40 55
T450
Stop 3,1 m/min 6,4 m/min 7,6 m/min
T650E
Stop 2,8 m/min 6,6 m/min /
T650EF
Stop 1,9 m/min 4,7 m/min /
T650
Stop 4,1 m/min 9,5 m/min /
T650F
Stop 2,2 m/min 5,2 m/min /
2 • Oven temperature
By pressing the key [
×] you can access to the parameter that sets the oven
temperature:
Fig. 4.5.3
The temperature can be set from +50°C to +200°C with an increase of 1°C.
3 • Programme storing
Data storing is performed by pressing ENTER or waiting for ten seconds after data
entering, storing is automatic.
4.6 PARAMETERS MENU [F3 AND +]
By contemporarily pressing the keys [F3] and [+] you access to the menu containing
the parameters.
1 • Language
Language setting menu:
Fig. 4.6.1
You can choose one of the following languages:
Conveyor speed40
M1
T.tunne 40
M1
Menu Parameters
English 3