Snap-On SOLUS Ultra User Manual

66
Chapter 8 Maintenance
This chapter covers how to care for your Diagnostic Tool.
8.1 Cleaning and Inspecting the Diagnostic Tool
When using the Diagnostic Tool perform the following tasks to keep it in top shape:
• Check the housing, wiring, and connectors for dirt and damage before and after each use.
• At the end of each work day, wipe the Diagnostic Tool housing, wiring, and connectors clean
with a damp cloth.
IMPORTANT:
Do not use any abrasive cleansers or automotive chemicals on the unit.
8.1.1 Cleaning the Touch Screen
The touch screen can be cleaned with a soft cloth and a mild window cleaner.
IMPORTANT:
Do not use any abrasive cleansers or automotive chemicals on the touch screen.
8.2 Battery Service
Follow all safety guidelines when handling the battery pack.
:$51 ,1*
Risk of electric shock.
• Prior to recycling the battery pack, protect exposed terminals with heavy insulating tape
to prevent shorting.
• Disconnect all test leads and turn diagnostic tools off before removing the battery pack.
• Do not attempt to disassemble the battery pack or remove any component projecting
from or protecting the battery terminals.
• Do not expose the unit or battery pack to rain, snow, or wet conditions.
• Do not short circuit the battery terminals.
Electric shock can cause injury.
:$51 ,1*
Risk of explosion.
• Use the proper factory lithium battery pack only, incorrect replacement or tampering
with the battery pack may cause an explosion.
Explosion can cause death or serious injury.

Snap-On SOLUS Ultra Specifications

General

Brand	Snap-On
Model	SOLUS Ultra
Category	Other
Language	English