SNBC BTP-P33 - Page 27

BTP-P33 User’s Manual
- 19 -
Printout is not clear
or has stains.
Paper roll is not installed
correctly.
Check whether the paper roll is
installed correctly or not.
Paper is out of
specification.
Use the recommended thermal
paper.
Dirty print head or platen
roller
Clean the print head or the
platen roller.
Print darkness is too low.
Increase the print darkness in
the button configuration.
Vertical print
content is missing.
Dirty print head or platen
roller
Clean the print head or the
platen roller.
Print head error
Contact your local dealer or
manufacturer.