Vega 30 Router User Manual Rack Mounting Safety 2.4
Issue1 Revision 1 Page 12 © 2017 SAM
2.3.1 Supplied Power Cords
The external Vega 30 power supply modules are each shipped with a power cord with a
standard molded IEC female socket on one end and a standard mains plug on the other.
2.4 Rack Mounting
When rack-mounting the Vega 30 Router, a rack shelf is not required. Secure the Vega router
to the rack using the front ears. See Section 5 “Installation” on page 41 for details.
2.5 Compliance Standards
This equipment complies with the following standards:
EN60950-1: 2006
Safety of information Technology Equipment Including Electrical Business Equipment.
UL1419 (4th Edition) - UL File E193966
Standard for Safety - Professional Video and Audio equipment
2.6 EMC Standards
This unit conforms to the following standards:
EN 55032:2012 (Class A)
EN 55103-2:2009 (Environment E2)
EN 61000-3-2:2014 (Class A)
EN 61000-3-3:2013
Federal Communications Commission Rules, 47 CFR: Part 15, Subpart B (Class A)
• The Vega 30 with its external power supply modules has more than one power
supply cord. To reduce the risk of electrical shock, disconnect all the power supply
cords before servicing.
• Isolate the unit from the outputs of other products before servicing.
• The DC power inlets on the Vega 30 Router are the DC power disconnection
devices for the Vega 30 Router unit.
• The IEC power inlets on the Vega 30 external power supply modules are the AC
mains power disconnection devices for the Vega 30 Router and its external DC
power supply unit modules.
• To reduce the risk of electric shock, plug each power supply cord into separate
branch circuits employing separate service grounds.
Warning:
This equipment is compliant with Class A of CISPR 32.
In a residential environment this equipment may cause radio interference.
To Next Page
Loading...
Need help?
General