Vega 30 Router User Manual Introduction Sources and Destinations 9.1
Issue1 Revision 1 Page 162 © 2017 SAM
9 Sources and Destinations
This section describes the Vega 30 Router sources which are routable to destinations:
9.1 Introduction
Sources and destinations are routed by the router. Both comprise:
• Up to one Video channel.
• Up to 16 Audio channels.
9.1.1 Destinations
Destinations may have sources routed to them.
Destinations are numbered 1 to 58 and include:
• Video outputs (1 to 34).
• Six MADI outputs (35 to 58).
Destinations are pre-defined.
Destinations have an individual default destination name.
The user may edit the destination name.
There are 8- and 32-character names.
A destination comprises up to one video signal and 16 audio channels.
• If a destination has a video channel,
then it is assumed to be the corresponding physical video output port on the router
(comprising video with 16 channels of embedded audio).
• If a destination does not have a video channel,
then it is assumed to be part of a MADI output port (16 audio channels, one quarter of
the 64 channels of a MADI port).
9.1.2 Sources
Some sources are pre-defined and others are user-defined.
Sources can be routed by the router to destinations.
Sources have an individual Source number.
There are up to 500 sources, including:
• Video inputs, pre-defined (Source numbers 1 to 34).
• Three MADI inputs, pre-defined (Source numbers 35 to 46).
• User-defined sources (Source numbers 47 to 500).
Each source has a default source name. The user may edit the source name.
There are 8- and 32-character names.
A source comprises up to one video signal and 16 audio channels.
9.1 “Introduction” page 162
9.2 “Source Types” page 163
9.3 “User-defined Sources” page 164
9.4 “Making User-defined Sources” page 170
To Next Page
Loading...
Need help?
General