To Next Page

To Previous Page

Vega 30 Router User Manual Set Routes Vega 30 Web Interface 6.7

6.7.4 Destination Protect

A destination may be protected, to prevent other routes being made to it. Protecting a

destination is an operational control and is carried out by a user from a panel, from the Vega

30 Web interface, or from a RollCall routing template screen.

For example, to perform a 3 hour long recording, a destination can be protected to prevent

anyone else from accidentally disturbing the recording.

In the Vega 30 Web interface, Destination Protect is carried out in the Set Routes page.

The various Protect button appearances, see Table 23, may be seen when destinations are

selected; the Protect push button will show:

• “Protect” - if the destination can be protected.

• “Unprotect” - if the destination is protected by this local web interface.

• “Protected by others” - if the destination is protected by another panel and user.

To protect a destination:

1. Select an unprotected destination. The Protect button should show “Protect”.

2. Click the Protect button.

A small padlock icon appears on the destination button.

The selected destination is now protected.

To remove protection from this (now protected) destination:

3. Temporarily select any other destination, then select the protected destination again.

The Protect button should show “Unprotect”.

4. Click the Protect button. The selected destination is now protected.

Item Description

Protect toggle push button.

Click button to protect/unprotect the selected destination.

With a destination selected, the Protect button may show the following:

• Protect - Click to protect the selected destination.

• Unprotect - Click to remove protection.

• Protected by others - The selected destination has been

protected from some other control panel, by another user.

Only the “protecting” panel can remove this protection.

Table 23 Destination Protect Control

Note:

Destination protection can only be removed by the panel/screen that set the Protect or by

a master panel.

Snell Advanced Media Vega 30 User Manual

Questions and Answers: