PowerMagic 400V C&I Energy Storage System User Manual
The lifting capacity of the crane is more than 6t and the
working radius is not less than 5m; the carrying capacity of
the forklift truck is ≥4t. If the working conditions at the site
do not meet the requirements, it is necessary to find a
professional to carry out an assessment.
Personnel carrying out forklift transport and lifting
operations are required to undergo relevant training and be
qualified before taking up their duties.
Forklifts and lifting tools need to be inspected and qualified,
and tools are complete before use.
Ensure that the lifting tool is securely fixed to a load-bearing
fixture or wall.
Confirm that the crane and cable meet the requirements
before lifting.
The doors of the energy storage cabinets are all closed and
locked.
Ensure that the steel cable is connected safely and reliably.
A left-to-right or right-to-left lifting sequence is
recommended to ensure smooth lifting.
It is strictly prohibited for unrelated persons to enter the
forklift truck transport area, lifting area, and to stand under
the boom.
Ensure that the crane is in the right position and cannot be
lifted for long distances.
Keep smooth, the cabinet diagonal tilt ≤ 5 °.
Ensure that the angle between the two lifting cables is <60°.
Forklift trucks transport and lift equipment gently, lift the
equipment slowly, and the energy storage system should
be lifted slowly and smoothly to avoid impact on the
internal equipment.
When the energy storage system is in contact with the
concrete support platform, wait until the four support force
surfaces are relatively uniform before removing the lifting
cable and forklift arm.
It is prohibited to drag the wire rope and spreader, and
prohibited to use hard objects to hit.
To Next Page
Loading...