Determine the base points of the energy storage system installation on the concrete support
platform and record the base points with a marker. Based on the mounting base points, draw the
locations of the four corner pieces of the energy storage system using an inkwell and a long leather
tape measure.
Step 2
Remove the wrapping film, pearl cotton,packing carton,and corner protection paper from the
outside of the unit.
Figure 4.9 Unpacking Schematic for Energy Storage Cabinet
Step 3
Adjust the direction of the energy storage system to be consistent with the set installation
direction, use a forklift truck to fork onto the concrete support platform, or connect the lifting cable
to lift the energy storage system onto the concrete support platform. When installing the energy
storage system, it must be ensured that the base of the energy storage system coincides with the base
position drawn on the concrete support platform.
To Next Page
Loading...