SolarEdge SE K Series User Manual

Indication
ON/ OFF/ P
switch
position
LED
Comment
FAULT POWER COMM.
Power
Optimizers not
paired
ON (1)
OFF Blinking
S_OK: ON
No S_OK:
OFF
S_OK: ON
communication
with the
monitoring
platform is
established
Pairing Blinking Blinking Blinking 
Wake-up/ Grid
Monitoring
OFF Blinking Blinking 
System
Producing
OFF ON
S_OK: ON
No S_OK:
OFF

Night mode
(no production)
OFF Flickering
S_OK: ON
No S_OK:
OFF

Inverter is OFF
(Safe DC)
 OFF (0)
OFF Blinking 
Inverter is OFF
(DC not safe)
Blinking Blinking
S_OK: ON
No S_OK:
OFF

Inverter
configuration
or reboot
ON / P ON ON ON 
Inverter
firmware
upgrade
ON / P Alternating Alternating Alternating
The upgrade
process can take
up to 20 minutes
Error Any ON
ON/ OFF/
Blinking/
Flickering
ON/ OFF /
Blinking/
Flickering
Refer to Errors
and
Troubleshooting
on page 85
The following table describes production percentage of AC information by LED color
and ON/OFF/P switch position.
Chapter 3: Installing the Synergy Manager and Synergy Units38
Three Phase Inverters with Synergy Technology PN: SExxK-xxxxIxxxx

SolarEdge SE K Series Specifications

General

Brand	SolarEdge
Model	SE K Series
Category	Inverter
Language	English